Made by the FurniMesh team. FurniMesh (furnimesh.com) is our own product, so we benefit when you use it. How we handle that.

How to Scan Furniture With Your Phone

A routine for getting a clean, correctly sized 3D model of a chair, table or sofa from a phone scan, plus what to do when you can't walk around the piece. For that case, FurniMesh (furnimesh.com), from our team, works from a single photo instead.

Published and updated November 22, 2026 · By the Best 3D Scanner App team (FurniMesh)

Furniture is one of the best things to scan with a phone, because most pieces are matte, textured and big enough for photogrammetry to see clearly. It also fails in predictable ways: thin legs vanish, the underside goes missing, and plain upholstery turns into lumpy blobs. This guide is a practical routine that avoids those failures, written for apps such as KIRI Engine, RealityScan Mobile and Polycam's photo mode.

Lady's writing desk with tambour shutters and brass pulls in a museum gallery
A writing desk like this one needs extra photos low down, so the app can see inside the knee space and under the drawers. Photo: Daderot, CC0, via Wikimedia Commons (source)

Before you shoot: set up the piece

Move the piece away from the wall so you can walk a full circle around it, ideally with a meter of space on every side. Remove cushions or throws that you don't want in the model, and close drawers unless you want them open in the scan. If the floor is a plain color, lay down a patterned rug or newspaper: photogrammetry uses the floor to work out camera positions, and a busy surface helps it. Measure one clear dimension with a tape measure, such as the width of a table top, and write it down. You will need it to set the scale later.

Light is most of the result

Flat, even light gives the cleanest textures. An overcast day near a large window is ideal; so is a room with several ceiling lights on and no direct sun. Avoid a single lamp to one side, which bakes a hard shadow into the texture, and avoid the phone flash, which moves with you and changes the lighting in every frame. If a scan looks splotchy, the light changed while you were shooting, usually because the sun came out or you blocked a lamp.

Coverage: rings, overlap and the top pass

Walk around the piece in rings, keeping the whole object in frame. Take the first ring at about knee height, angled slightly up, the second at chest height, and the third from above, angled down. Move a step between shots so that each photo overlaps the previous one by roughly two thirds. Then add close shots of anything detailed, such as carved feet, handles or a seat edge, and a few from very low to capture the underside of a table top or the inside of a chair frame.

Starting photo counts for common pieces (our planning guidance, not vendor figures)
PieceApprox. sizePhotos to planRingsMain difficulty
Dining chair45 x 50 x 90 cm60 to 803 (low, mid, high)Gaps between back slats and legs
Side table50 x 50 x 60 cm50 to 703Underside of the top
Two-seat sofa160 x 85 x 80 cm90 to 1302 plus a top passPlain fabric with little texture
Writing desk100 x 55 x 110 cm80 to 1203Recesses, drawers and dark gaps
Table lamp35 cm wide, 60 cm tall50 to 703Translucent shade and thin stem

These counts sit inside the free limits of the apps we cover: KIRI Engine's free photo scan accepts up to 150 photos, and Polycam's free tier up to 150 images per capture. RealityScan Mobile shows a coverage overlay, which is the easiest way to see which angles you have missed.

Surfaces that fail, and what to do

Photogrammetry matches visible detail between photos, so it struggles with anything that looks different from every angle or has no detail at all.

  • Glossy lacquer and polished wood show reflections that move as you move. Shoot in diffuse light, or use a featureless-object mode such as KIRI Engine's Pro option.
  • Glass and mirrors do not scan. Mask them out, or model a glass top as a simple box later.
  • Plain upholstery in a single color has little texture. Small pieces of removable painter's tape on the fabric give the software anchor points; remove them from the texture afterward or accept the marks.
  • Thin legs and spindles often break up. Take extra close shots and keep the background behind them busy and well lit.
  • Deep carving like the cabinet below needs many more angles than a flat panel, and recesses still come out softened.
Heavily carved Renaissance cabinet with many recesses and columns
Deep carving, columns and recesses: the kind of surface where a phone scan loses detail and needs many more photos. Photo: Daderot, Public domain, via Wikimedia Commons (source)

LiDAR or photos for furniture?

If you have a LiDAR iPhone, it is tempting to use LiDAR for everything. For a single piece, photo mode usually gives a better result: LiDAR captures overall shape quickly but softens edges and texture. Use LiDAR when you want the piece in the context of its room, and photo mode when you want the piece itself. Our LiDAR guide explains why.

Setting the real-world scale

Photogrammetry models have no built-in size. After processing, use the app's measure or rescale tool (KIRI Engine and Polycam both include one) and set the dimension you measured. A worked example: you measured a side table top at 50.0 cm across, and the raw model shows the same edge as 0.73 units. Set that edge to 50 cm and the app scales everything by the same factor. Check a second dimension, such as the height, against your tape measure. If it is more than a centimeter or two off, the scan has some distortion and you should reshoot the side that looks warped.

Cleaning up the result

Crop away the floor and stray background with the app's crop box before exporting. If you plan to bring the model into SketchUp or a room planner, export OBJ or GLB and check the polygon count: a raw scan of a chair can run to hundreds of thousands of triangles, which slows SketchUp down. Most apps offer a reduced-detail export; use it for layout work and keep the full-detail file for renders.

When scanning isn't possible

Sometimes the piece is a photo on a retailer's site, or it is too heavy to pull away from the wall. In that case, a one-photo tool is the practical answer. FurniMesh (furnimesh.com), our own product, generates a textured model of a single furniture piece from one clear photo and exports SKP for SketchUp as well as GLB, OBJ and BLEND. Its hidden sides are inferred, so it is good for layout and visualization rather than exact replication. Turn a furniture photo into a SketchUp model, or read when each approach wins.

Related guides

Each guide covers a different question, so there is little overlap between them.