Made by the FurniMesh team. FurniMesh (furnimesh.com) is our own product, so we benefit when you use it. How we handle that.

LiDAR Explained: Which iPhones and iPads Have It

Apple's verified LiDAR device list, what the sensor really changes in a 3D scan, and when your phone's ordinary camera does a better job. For pieces you can only photograph, FurniMesh (furnimesh.com), built by our team, skips scanning altogether.

Published and updated November 22, 2026 · By the Best 3D Scanner App team (FurniMesh)

LiDAR is the depth sensor on Apple's Pro iPhones and iPad Pro models. It is why some scanning features in apps like Polycam and 3D Scanner App only appear on certain devices. This guide explains what the sensor does, lists exactly which devices have it according to Apple, and shows when it helps and when photo-based scanning is better.

What LiDAR actually does

LiDAR stands for light detection and ranging. The sensor fires invisible infrared light and times how long it takes to bounce back, which gives a depth value for points across the scene. A scanning app combines those depth readings with the phone's motion tracking to build a mesh of the surfaces around you as you move. Because depth is measured rather than calculated from photos, LiDAR works on plain walls and in dim light, and the result comes out close to real-world scale without a reference measurement.

The trade-off is resolution. The depth grid is coarse compared with the camera, so small details such as carving, piping on a cushion or a thin chair spindle tend to be smoothed over. Apps use the camera image for texture on top of the LiDAR mesh, which is why a LiDAR scan can look sharp in color while its geometry is soft.

Which iPhones and iPads have LiDAR

Only Pro models. Standard iPhones, the Plus, Air and e models, and non-Pro iPads do not have it. This list comes from Apple's iPhone list and Apple's iPad list, checked in November 2026.

Apple devices with a LiDAR Scanner, from Apple Support, checked November 2026
DeviceModels with LiDAR (per Apple)
iPhone12 Pro, 12 Pro Max, 13 Pro, 13 Pro Max, 14 Pro, 14 Pro Max, 15 Pro, 15 Pro Max, 16 Pro, 16 Pro Max, 17 Pro, 17 Pro Max
iPad Pro 11-inch2nd, 3rd and 4th generation; M4 and M5
iPad Pro 12.9-inch4th generation and later
iPad Pro 13-inchM4 and M5

A quick way to check your own device: look at the rear camera bump. The LiDAR Scanner is a small, flat black circle beside the lenses, usually below the flash. If your bump has two or three lenses and no such circle, your device does not have LiDAR.

LiDAR mode vs photo mode on the same phone

Most good apps offer both on a Pro device, and choosing the right one matters more than the app itself.

LiDAR vs photo mode on the same device
TaskLiDAR modePhoto mode (photogrammetry)
Room or hallwayFast, one sweep, roughly to scaleSlow, fails on plain walls
Chair or small tableCaptures shape, soft detailSharper edges and texture
Floor planYes, with RoomPlan-based modesNot practical
Dark or low lightDepth still worksPoor
Glossy or plain surfacesDepth works, texture weakOften fails
ScaleBuilt in, approximateMust be set from a measurement

The rule of thumb: LiDAR for spaces, photos for objects. A worked example: capturing a 4 x 3.5 m bedroom with Polycam's Space mode takes a slow walk around the walls, while a photogrammetry pass of the same room would need hundreds of photos and would likely break on the plain walls. Capturing a single dining chair is the reverse: 60 to 80 photos in photo mode give crisp slats and legs, where LiDAR would merge the gaps between the slats.

Which apps use LiDAR, and how

Polycam

Polycam's Space mode, for rooms and buildings, is available only on compatible iOS devices. Its photo mode, splats and 360 captures also work without LiDAR. Floor plans and advanced measurements are on the Business plan.

3D Scanner App

3D Scanner App's headline mode is LiDAR scanning on iPhone 12 Pro and iPad Pro or later. It also offers RoomPlan mode for quick floor plans, built on Apple's room-scanning framework, and exports LAS point clouds and DXF floor plans, which matter for surveyors and architects.

KIRI Engine

KIRI Engine includes LiDAR scanning for rooms, scenes and objects on LiDAR-equipped iOS devices in its free plan, alongside photo scanning. Pro adds enhanced cloud processing for LiDAR scans.

Scaniverse

Scaniverse uses LiDAR when available but has offered an option to ignore it since early 2026, and it runs on iPhones without LiDAR from the XS onward. Its focus is Gaussian splats rather than measured meshes.

Do you need to buy a LiDAR device?

Only if rooms, floor plans or measured spaces are central to your work. For objects, a regular iPhone or an Android phone with a good camera and a photogrammetry app such as KIRI Engine will match or beat LiDAR quality. If you want floor plans as a renovation contractor or designer, a Pro iPhone or iPad Pro plus Polycam Business or 3D Scanner App is a sensible investment.

What LiDAR doesn't solve

LiDAR still needs you to be there. It can't capture a piece you've only seen in a photo, and it struggles with glass and mirrors, which reflect the laser. For single furniture pieces you can't scan, FurniMesh (furnimesh.com), our own product, generates a model from one picture. It is not a LiDAR or room tool, and the parts the photo doesn't show are inferred. See FurniMesh's one-photo model generator, and compare the two approaches in our scanning vs one-photo guide.

iPad Pro or iPhone Pro for scanning?

Both carry the same kind of sensor, so the choice is about handling. An iPad Pro's large screen makes it easier to see coverage while you scan a room, and its battery lasts longer through a long session. An iPhone Pro is lighter, fits under furniture and into tight corners, and is the device you'll have with you when you spot something worth capturing. For occasional room scans, the phone is enough. For contractors or designers who scan rooms every week, an iPad Pro is easier on the arms and eyes.

Related guides

Each guide covers a different question, so there is little overlap between them.